INGREDIENT INFORMATION

Back to: INGREDIENT INFORMATION

INGREDIENT INFORMATION

Emulsifying wax: Emulsifying wax is an organic source that is best treated to be used in cosmetics and skincare products. It is a very good moisturizer for the skin. The base of the wax is extracted from the fatty acids and plant oils. When the wax is extracted, it is then mixed with a detergent that is sodium dodecyl sulfate. This mixture becomes an emulsifier. It helps to bind the oils with water and convert them into a cream or lotion.

GMS: Glyceryl monostearate (GMS) is an emulsifier and thickener that’s used in creams to improve the texture and stability. It’s also used in lotions, moisturizers, and other skincare products. 

Cetyl Alcohol: Cetyl alcohol is used in creams as an emulsifier, thickening and conditioning agent for skin. It helps keep ingredients from separating, and prevents the skin from drying out. 

Allantoin : Allantoin is a naturally-occurring chemical compound that’s used in many creams and other skin care products to soothe, moisturize and heal the skin. Allantoin helps soften dry, rough, or flaky skin. Allantoin can help relieve skin irritations caused by sun exposure, shaving, or minor cuts. Allantoin can help promote cell regeneration and speed up the healing of cuts, abrasions, and burns. 

Lanolin: It is an excellent moisturizer and  is used on the skin to treat or prevent minor skin irritations such as blisters, burns, dry skin, and diaper rash.

Geoguard ECT: Natural Preservative

Zinx Oxide: Zinc oxide is a white powdery compound obtained from oxidizing zinc. The oxidation makes zinc a potent ingredient to be used to treat several skin conditions including inflammation, sun damage, acne, etc. Zinc oxide has largely been used as a strong sun protection ingredient for ages.

Calamine Clay: Calamine clay can help with a variety of skin concerns, including acne, dark spots, and skin irritation. It can also soothe itching and irritated skin. Helps with sensitive skin

Magnesium Stearate: Magnesium stearate is used in powdersto improve flow, improve consistency and prevent caking. It’s also used as a lubricant to reduce friction between particles. 

 SCI: SCI (Sodium Cocoyl Isethionate) is a gentle, white, powdery surfactant derived from coconut oil acts as a gentle cleansing agent, creating rich and creamy lather while removing dirt effectively without stripping away natural moisture. making it suitable for most hair types, especially sensitive scalps; essentially, it provides a thorough clean with minimal irritation due to its mild surfactant properties. 

SLSa: Sodium Lauryl Sulfoacetate is a surfactant that is derived 100% naturally. It comes from coconut oil and palm oil. It is also completely free of all sulfates. A surfactant is a surface acting agent, which basically means that it causes products to fizz and foam. Offers mild and gentle cleansing and creates good lather

Decyl Glucoside: Decyl glucoside is a surfactant derived from coconut, corn and other plant sources. It’s used in many personal care products, including cleansers, shampoos, and body washes. Decyl glucoside is a non-ionic surfactant that is used as a foaming, cleansing, conditioning, or emulsifying agent.It has excellent foaming capacity and good dermatological compatibility.

Sodium Gluconate: It works as a natural chelating agent to keep the product stable

BABY LOTION

Phase A

Sunflower oil  3%

Almond oil 3%

Cocoa butter 2%

Emulsifying wax 3%

Cetyl alcohol 1%

 

Phase B

Distilled water80%

Allantoin 0.2%

Aloevera gel 5%

Lanolin 1%

Geoguard ECT /Preservative ECO 1%

Essential oil 0.5-1% (lavender/camomile/rose)

Procedure:

1.Heat phase A upto to 80 degree

2.Heat phase B upto 80 degree

3.Mix phase A and B and blend until creamy

4.Cool and add cooldown phase ingredients and mix thoroughly

 

 BABY CREAM

Phase A

Water 75%

Glycerine 5%

Xanthan Gum 0.2%

Phase B

GMS 6%

Cetyl alcohol 2%

Shea butter 6%

Olive oil 3%

Phase C

Lanolin 1%

Vitamn E 0.5%

Essential oil 0.5-1%

Geoguatd ECT /Preservative ECO 1%

Procedure:

1. Heat phase A ingredient upto 80degrees
2. Heat phase B ingredients upto 80 degrees
3. Mix both phase A and phase B at around 70degrees till the mixture turns into a creamy liquid
4. Cool and add phase C ingredints mix well again
5. Store in steralised container

BABY POWDER

Talc 77%

Starch 10%

Zinc Oxide 5 %

Oats Powder 1%

Rice Starch 1%

Magnesium sterate 5%

Fragrance or essential oil 0.5%-1%

Procedure:

Mix all the ingredients in a mixies and then seive it and fill into sterilised jars 

TALC FREE BABY POWDER

Arrowroot Powder 36

Cornflour 28

Kaolin Clay 20

Calamine Clay 5%

Zinc Oxide 5%

Almond Oil 1%

Vitamin E 0.5%

Procedure:

Mix all the ingredients in a mixies and then seive it and fill into sterilised jars 

 

BABY MASSAGE OIL

Olive Oil 19%

Almond Oil 10%

Sunflower Oil 40%

Seasme Oil 10%

Fractionated coconut oil 20%

Vitamin E 0.5%

Lavender/ Chamomile essential oil 0.5%

Procedure: 

Mix all the ingredients and stir well and fill in steralised bottles and keep away from heat and direct sunlight

 BABY SHAMPOO

Phase A
Distilled water 77 %
Sodium Gluconate 0.2%
SCI 4%
SLSa 4%
Glycerin 1%

Phase B
CAPB 10%

Phase C
Lamesoft PO 65 2%

Geoguatd ECT /Preservative ECO 1%

Fragrance or  essential oil 1%
Color q.s

Procedure:

1. Mix Water, Sodium Gluconate, SCI, SLSa, and glycerin by double boiling or boiling on low heat.
2. Cool the mixture, add CAPB, and mix thoroughly.
3. Add the rest of the ingredients except essential oil and mix thoroughly.
4. Finally, add essential oil and color and mix thoroughly.

DIPER RASH CREAM

Phase A

Shea Butter- 60%

Cetyl Alcohol 6%

Avocado oil 8%

Beeswax 10%

Olive/jojoba oil 10%

BHT 0.2 %

Phase B

Vitamin E 0.2%

Zinc Oxide 5% 

Lavender or Chamomile essential oil 1%

Procedure

1. Melt Phase A ingredients at a very low temperature preferably on an induction cook top at 60 degrees Celsius. 
2. Let it cool at room temperature. 
3. Once cool refrigerated till the mixture is firm.
4. Whisk with a stick blender-whisk attachment for a few minutes. Let it set again at room temperature for an hour. Continue whipping till you get fluffy butter.
5. Add the phase B ingredients and whip again.
6. If the right consistency is reached,  fill n cream jars.
7. Sterilize your cosmetic jar by spraying it with Rubbing Alcohol/Surgical Spirit and wiping it dry with a tissue.

 

BABY BODY WASH

Phase A
Distilled water/ Aloevera Extract 64%
Sodium Gluconate 0.2%
SCI 6%
Decyl Glucoside 10%
Glycerin 1%

Phase B
CAPB 14%
Phase C
Citric Acid 0.5%

Geoguatd ECT /Preservative ECO 1%

Fragrance or  essential oil 1%
Color q.s

PROCEDURE:

1. In a steralised stainless steel container measure the phase A ingredients one by one except CAPB and cocodi then heat it until everything is completely melted and dissolved. Let it cool to room temperature.
2. On cooling add the CAPB and cocodi and mix well.
3. Finally, add phase B ingredients and mix thoroughly.
4. Fill into sterilized bottles and use after 24 hours.